2021.11.26 19:58 ThesoftRosesALT quick W/F/L?
2021.11.26 19:58 turkeyinthestrawman Krusty the Clown: Send in the Clowns (played at Stephen Sondheim's 75th birthday concert)
|submitted by turkeyinthestrawman to TheSimpsons [link] [comments]|
2021.11.26 19:58 shootingbot Brownells: Hodgdon Powder Co., Inc. Hodgdon Titegroup Powder
2021.11.26 19:58 ChicagoCubsRL97 Would you rather be bitten by a Black Widow or a Brown Recluse?
2021.11.26 19:58 JD0x0 PSA: Mesa Studio Caliber 22 heat issues and why you don't 'Just add a fan'
So, these amps are known fairly well to run hot and I see a lot of internet wizards say 'just add a fan'
Now, for some reason, all guitar amps running EL84's seem to run them over spec, but the Studio .22's are especially bad. These are fixed bias, push pull, class A/B amps, which typically your max safe dissipation is about 70%. Mesa biased these at 120% dissipation, which even for a cathode biased amp (which this is not) is far too hot. To make matters worse, the power tubes are PCB mounted and run in a 'tubes down' fashion, so all that heat rises right up into the board. It's not uncommon for the PCB's to have visible heat damage due to this. Not to mention your EL84's will not last very long running like this.
The obvious answer is to cool the bias down. Unfortunately, on these amps, this is easier said than done. The bias is non-adjustable stock, and to make matters worse, the Phase Inverter bias is fed off the same bias supply, rather than using a more traditional 'LTPI' for biasing. This means changing your PI tube can affect the power tube bias, and changing the bias for the power tubes can affect the bias on the PI.
My guess is, Mesa wanted people buying their 'brand' of tube and they set these amps inherently hot, so people would run through tubes faster.
In addition to the bias changes, I'd recommend changing all the carbon comp resistors in the power supply. These were a very poor choice. Carbon comps have a fairly high failure rate, they can crack or crumble due to heat, and they drift very heavily over time. While upgrading the resistors, elevate them off the PCB for better heat dissipation, and increase the screen grid resistors from 470 ohms, to at least 1k, preferably higher 1.5k-2.2k to protect the tube's screens, for longer tube life, and less heat.
If after all that, you want to add a fan, that won't hurt, but to simply chuck a fan in and call it a day, is not a fix for these. If you own one of these amps, be sure to have it fully serviced and have these changes made BEFORE you do damage to the PCB. Once that starts happening you can have issues with the board conducting, which will only make matters worse. No one makes replacement PCB's for these, so if you cook it bad enough, the amp is dunzo. Garbage, or a donor chassis for a build. Don't let that happen. Service your amp.
submitted by JD0x0 to GuitarAmps [link] [comments]
2021.11.26 19:58 thtrong Uworld discount ?
2021.11.26 19:58 EditorRedditer She just went to pieces…
|submitted by EditorRedditer to HolUp [link] [comments]|
2021.11.26 19:58 Jean-Undercut No one to eat a holiday dinner with ? 😔🤚🏽 Come take a seat at 𝐏𝐋𝐒𝐒𝐇𝐎𝐎𝐓𝐔𝐒 ☃️ Join us for game and movie nights, vcs, interactive channels and new friends! Plus if you join Quas might kiss you 🧑🎄 [Main Age Group 18-25]
|submitted by Jean-Undercut to DiscordAdvertising [link] [comments]|
2021.11.26 19:58 LiveFromShawshank My complete B&N November 50% off sale haul. The final 3 came today.
|submitted by LiveFromShawshank to criterion [link] [comments]|
2021.11.26 19:58 ashkanahmadi What's the best way of creating modals on the fly? I have many items on the page and each one has a Delete button. I want the button to open a modal to ask for confirmation. I can solve it by creating as many modals as items but that's so many DOM elements. What do you recommend? Example included
So I have a page where I fetch many items from the database and display them on the page. I have recreated a very simplified version of it here:
As you can see, every time you click on the Delete button, I console.log the id of that item but I want the Delete button to open a modal to ask for confirmation and when I press the primary button on the modal, then console.log the id.
How can I achieve this? Should I create the whole modal element with JS after clicking Delete, add it to the DOM and then attach the function to the primary button of the modal? Then delete it from the DOM?
submitted by ashkanahmadi to bootstrap [link] [comments]
2021.11.26 19:58 TheMentalist10 Cathartic. Hope you're all doing okay <3
|submitted by TheMentalist10 to Sondheim [link] [comments]|
2021.11.26 19:58 Jabroni748 8 am, 27 degrees. Empty course is always worth the cold hands!
|submitted by Jabroni748 to discgolf [link] [comments]|
2021.11.26 19:58 FreeAbroad2535 What’s something you can say during both an intense workout and sex?
2021.11.26 19:58 mystique_Wolf My lunar client isnt working, its been like this for a week and i tried leaving it like that for half an hour and nothing happened
|submitted by mystique_Wolf to Minecraft [link] [comments]|
2021.11.26 19:58 twinfiresigns14 How can parents and elders/priests in these cults sanction the abuse - especially sexual abuse - of children they are charged to protect?
I’ve been reading a bit about the Zion cult and it’s shocked me how these parents apparently allowed their children to live with them while they (the kids) were being abused daily under their noses.
Same with the Children of God/Family International. They obviously knew it was wrong.
And then there’s the Jehovah’s Witnesses and a number of other prominent churches that ‘reported’ the abuse within their own organisations to higher-ups who then did nothing. In such massive organisations, it’s impossible that every single person that heard about it covered it up to cover up their own criminal activities.
Are these parents that brainwashed to believe their elders are supreme? How are they trained out of these default mindsets that child abuse is heinous?
I mean, your ingrained reaction, your hair-trigger reaction, should be to call bloody child welfare services when a kid discloses abuse! Not go to the elders and demand two witnesses!
This is not even touching on CSA in ‘’mainstream’ religions like Catholicism.
submitted by twinfiresigns14 to cults [link] [comments]
2021.11.26 19:58 Responsible_Ad_2201 Average UK dispatch time
I ordered a genesis yesterday morning, and haven't heard anything about dispatch times/delivery estimates. So I called SodaStream and was told that I should get a text from DPD with a slot. But I've not heard anything. Any recommendations?
I'm tempted to refuse the parcel, and go to Curry's and get the Genesis myself.
submitted by Responsible_Ad_2201 to SodaStream [link] [comments]
2021.11.26 19:58 A_J_H [PC] [PSN] [H] Credits [W] Sky blue halo
2021.11.26 19:58 thistooshallpost Your favorite thermal paste?
Hey, /buildapc! I need to repaste my laptop because I’m replacing its heat sink and would like to use some high quality paste. I do lots of gaming and 3D rendering so thermal performance is important to me.
What kind of paste would you recommend?
submitted by thistooshallpost to buildapc [link] [comments]
2021.11.26 19:58 Ugly_Truth75 Yeah, why?
|submitted by Ugly_Truth75 to meme [link] [comments]|
2021.11.26 19:58 nowdonewiththatshit Why is UPPFORA seemingly only for children?
The website says that it fits adult sized hangers and it fits perfectly in the space I have. Does anyone know why I can’t use this to hang adult size jackets and the like?
submitted by nowdonewiththatshit to IKEA [link] [comments]
2021.11.26 19:58 dohertyd33 Inflatable Graffiti - Into the Ocean (2021) [Indie/Dream Pop]
|submitted by dohertyd33 to SantaRosaSubmissions [link] [comments]|
2021.11.26 19:58 Evolvedtyrant Oh how the turns have tabled
|submitted by Evolvedtyrant to eu4 [link] [comments]|
2021.11.26 19:58 Clynking96 Something spiritual is, or at least was watching me.
I’m gonna preface this by stating that I am breaking a near month long break from social media to ask this question so that y’all understand the strength of the importance to me. If you do not believe in spirituality I am going to respectfully ask you to please leave it alone and/or ask you to forward this to someone you know who does.
At work I am not a freight inspector but I’m not NOT a freight inspector. For those of you who don’t know, freight inspection involved measuring and taking pictures of freight, sometimes weighing it as well depending on available equipment. I’ve been working at this company for a little over a month now.
I’ve always believed in spirituality in some degree. Back when I was in HS I tried to fit into pagan norms but they didn’t fit me so I didn’t stick around with pagans. As I moved on in life I would pay more or less attention to spirituality as it met my needs and right now I need spirituality more than ever for reasons I don’t want to disclose. So yeah, it’s important to me for the time being at least.
This past Wednesday, the day before thanksgiving 2021, I took a picture at work. I didn’t see anything odd on the cameras display and didn’t think much of it. It’s a picture of a John Deere part. When I went to upload the image later that night the photo, which I will upload if I can figure out how, was odd.
What I saw was a normal trailer. John Deere on the ground and some more in the background. What the picture showed was to beams of light that turned in a different direction and distorted the photo. At first I thought it was a light distortion and looked some up to see if it would explain what happened. Nothing showed the light changing directions. Again. NOTHING showed the light changing directions, just spreading out differently at best.
When I got the opportunity I asked a more spiritually inclined friend what it was. Her answer was that it was a lot of energy. She proceeded to follow up by reaching out to her spiritual mentor. Spirit mentor said something is watching me. Don’t know who or what. I have a few ideas but nothing really fits.
Idea 1. Is my old boss. We had a falling out and since then my life turned to hell. I don’t really wanna talking about it because I’m still trying to heal from it. To summarize it I tried to talk about my mental health and she decided that her impact on my mental health is not her responsibility. Again I’m still healing so I don’t want to talk about it.
Idea 2. My last work crush. This one admittedly doesn’t make too much sense. I had a HUGE thing for her. Still do if I’m being honest with myself. There were times where it was abundantly mutual and times where it was not. I wanted to believe she loved me. I’m not sure she ever did in hindsight.
Idea 3. My dead father. My father and I never, I repeat, NEVER got along. That n to the e to the v to the er. NEVER. He passed away just before my life finished spiraling out of control. The night he passed I was in the middle of a suicide attempt. I talked myself down ofc and found out the next morning he passed.
Otherwise I don’t know what to do to identify the entity.
submitted by Clynking96 to Advice [link] [comments]
2021.11.26 19:58 shootingbot Brownells: Hodgdon Powder Co., Inc. Hodgdon Powder H4350
2021.11.26 19:58 CyberCrimson95 New Club
Looking for people to join my club. Open to anyone, new or a veteran. Looking for active players just to have fun, learn more about the game and grow as a team. Let's become one of the best. Join TheCrimsons. Will be creating a discord soon.
submitted by CyberCrimson95 to Brawlstars [link] [comments]